|
|
|
|
Introduction
The AWK-3131A-RCC Series industrial 802.11n wireless AP/client is an ideal wireless solution for applications such as onboard passenger infotainment systems and inter-carriage wireless backbone networks because it provides a faster data rate compared to 802.11g devices. The auto carriage connection (ACC) feature facilitates easy deployment of wireless devices and increases the reliability of wireless carriage backbone networks. The AWK-3131A-RCC Series is also optimized for passenger Wi-Fi services and complies with a portion of the EN 50155 specifications covering operating temperature, power input voltage, surge, ESD, and vibration, making the products suitable for a variety of industrial applications. The AWK-3131A-RCC Series can also be powered via the PoE port for easier deployment.
High Data Rate and Bandwidth
-
High-speed wireless connectivity with up to 300 Mbps data rate
-
MIMO technology to improve the capability of transmitting and receiving multiple data streams
-
Increased channel width with channel bonding technology
Designed for Industrial-grade Applications
-
Industrial-grade QoS and VLAN for efficient data traffic management
-
Integrated DI/DO for on-site monitoring and warnings
-
Signal strength LEDs for easy deployment and antenna alignment
-
WLAN Standards
802.11a/b/g/n
802.11i Wireless Security
-
Modulation Type
DSSS
OFDM
802.11b: CCK @ 11/5.5 Mbps
802.11b: DQPSK @ 2 Mbps
802.11b: DBPSK @ 1 Mbps
802.11a/g: 64QAM @ 54/58 Mbps
802.11a/g: 16QAM @ 36/24 Mbps
802.11a/g: QPSK @ 18/12 Mbps
802.11a/g: BPSK @ 9/6 Mbps
802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps
-
Frequency Band for US (20 MHz operating channels)
2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.500 to 5.700 GHz (8 channels) excluding 5.600 to 5.640 GHz
DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.745 to 5.825 GHz (5 channels)
-
Frequency Band for EU (20 MHz operating channels)
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.500 to 5.700 GHz (11 channels)
DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
-
Frequency Band for JP (20 MHz operating channels)
2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
5.500 to 5.700 GHz (11 channels)
DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
-
Wireless Security
SSID broadcast enable/disable
WEP encryption (64-bit and 128-bit)
WPA/WPA2-Personal
WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
-
Transmission Rate
802.11b: 1 to 11 Mbps
802.11a/g: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps
-
Transmitter Power for 802.11a
23ą1.5 dBm @ 6 to 24 Mbps
21ą1.5 dBm @ 36 Mbps
20ą1.5 dBm @ 48 Mbps
18ą1.5 dBm @ 54 Mbps
-
Transmitter Power for 802.11b
26ą1.5 dBm @ 1 Mbps
26ą1.5 dBm @ 2 Mbps
26ą1.5 dBm @ 5.5 Mbps
25ą1.5 dBm @ 11 Mbps
-
Transmitter Power for 802.11g
23ą1.5 dBm @ 6 to 24 Mbps
21ą1.5 dBm @ 36 Mbps
19ą1.5 dBm @ 48 Mbps
18ą1.5 dBm @ 54 Mbps
-
Transmitter Power for 802.11n (2.4 GHz)
23ą1.5 dBm @ MCS0 20 MHz
21ą1.5 dBm @ MCS1 20 MHz
21ą1.5 dBm @ MCS2 20 MHz
21ą1.5 dBm @ MCS3 20 MHz
20ą1.5 dBm @ MCS4 20 MHz
19ą1.5 dBm @ MCS5 20 MHz
18ą1.5 dBm @ MCS6 20 MHz
18ą1.5 dBm @ MCS7 20 MHz
23ą1.5 dBm @ MCS8 20 MHz
21ą1.5 dBm @ MCS9 20 MHz
21ą1.5 dBm @ MCS10 20 MHz
21ą1.5 dBm @ MCS11 20 MHz
20ą1.5 dBm @ MCS12 20 MHz
19ą1.5 dBm @ MCS13 20 MHz
18ą1.5 dBm @ MCS14 20 MHz
18ą1.5 dBm @ MCS15 20 MHz
23ą1.5 dBm @ MCS0 40 MHz
20ą1.5 dBm @ MCS1 40 MHz
20ą1.5 dBm @ MCS2 40 MHz
20ą1.5 dBm @ MCS3 40 MHz
19ą1.5 dBm @ MCS4 40 MHz
19ą1.5 dBm @ MCS5 40 MHz
18ą1.5 dBm @ MCS6 40 MHz
17ą1.5 dBm @ MCS7 40 MHz
23ą1.5 dBm @ MCS8 40 MHz
20ą1.5 dBm @ MCS9 40 MHz
20ą1.5 dBm @ MCS10 40 MHz
20ą1.5 dBm @ MCS11 40 MHz
20ą1.5 dBm @ MCS12 40 MHz
19ą1.5 dBm @ MCS13 40 MHz
18ą1.5 dBm @ MCS14 40 MHz
17ą1.5 dBm @ MCS15 40 MHz
-
Transmitter Power for 802.11n (5 GHz)
23ą1.5 dBm @ MCS0 20 MHz
20ą1.5 dBm @ MCS1 20 MHz
20ą1.5 dBm @ MCS2 20 MHz
20ą1.5 dBm @ MCS3 20 MHz
19ą1.5 dBm @ MCS4 20 MHz
18ą1.5 dBm @ MCS5 20 MHz
18ą1.5 dBm @ MCS6 20 MHz
18ą1.5 dBm @ MCS7 20 MHz
23ą1.5 dBm @ MCS8 20 MHz
20ą1.5 dBm @ MCS9 20 MHz
20ą1.5 dBm @ MCS10 20 MHz
20ą1.5 dBm @ MCS11 20 MHz
19ą1.5 dBm @ MCS12 20 MHz
19ą1.5 dBm @ MCS13 20 MHz
18ą1.5 dBm @ MCS14 20 MHz
18ą1.5 dBm @ MCS15 20 MHz
23ą1.5 dBm @ MCS0 40 MHz
20ą1.5 dBm @ MCS1 40 MHz
20ą1.5 dBm @ MCS2 40 MHz
20ą1.5 dBm @ MCS3 40 MHz
19ą1.5 dBm @ MCS4 40 MHz
18ą1.5 dBm @ MCS5 40 MHz
18ą1.5 dBm @ MCS6 40 MHz
18ą1.5 dBm @ MCS7 40 MHz
23ą1.5 dBm @ MCS8 40 MHz
20ą1.5 dBm @ MCS9 40 MHz
20ą1.5 dBm @ MCS10 40 MHz
20ą1.5 dBm @ MCS11 40 MHz
19ą1.5 dBm @ MCS12 40 MHz
19ą1.5 dBm @ MCS13 40 MHz
18ą1.5 dBm @ MCS14 40 MHz
18ą1.5 dBm @ MCS15 40 MHz
-
Receiver Sensitivity for 802.11a
-90 dBm @ 6 Mbps
-88 dBm @ 9 Mbps
-88 dBm @ 12 Mbps
-85 dBm @ 18 Mbps
-81 dBm @ 24 Mbps
-78 dBm @ 36 Mbps
-74 dBm @ 48 Mbps
-74 dBm @ 54 Mbps
-
Receiver Sensitivity for 802.11b
-93 dBm @ 1 Mbps
-93 dBm @ 2 Mbps
-93 dBm @ 5.5 Mbps
-88 dBm @ 11 Mbps
-
Receiver Sensitivity for 802.11g
-88 dBm @ 6 Mbps
-86 dBm @ 9 Mbps
-85 dBm @ 12 Mbps
-85 dBm @ 18 Mbps
-85 dBm @ 24 Mbps
-82 dBm @ 36 Mbps
-78 dBm @ 48 Mbps
-74 dBm @ 54 Mbps
-
Receiver Sensitivity for 802.11n (2.4 GHz)
-89 dBm @ MCS0 20 MHz
-85 dBm @ MCS1 20 MHz
-85 dBm @ MCS2 20 MHz
-82 dBm @ MCS3 20 MHz
-78 dBm @ MCS4 20 MHz
-74 dBm @ MCS5 20 MHz
-72 dBm @ MCS6 20 MHz
-70 dBm @ MCS7 20 MHz
-95 dBm @ MCS8 20 MHz
-90 dBm @ MCS9 20 MHz
-87 dBm @ MCS10 20 MHz
-83 dBm @ MCS11 20 MHz
-80 dBm @ MCS12 20 MHz
-74 dBm @ MCS13 20 MHz
-71 dBm @ MCS14 20 MHz
-69 dBm @ MCS15 20 MHz
-87 dBm @ MCS0 40 MHz
-83 dBm @ MCS1 40 MHz
-83 dBm @ MCS2 40 MHz
-80 dBm @ MCS3 40 MHz
-76 dBm @ MCS4 40 MHz
-73 dBm @ MCS5 40 MHz
-69 dBm @ MCS6 40 MHz
-67 dBm @ MCS7 40 MHz
-93 dBm @ MCS8 40 MHz
-88 dBm @ MCS9 40 MHz
-85 dBm @ MCS10 40 MHz
-82 dBm @ MCS11 40 MHz
-78 dBm @ MCS12 40 MHz
-73 dBm @ MCS13 40 MHz
-69 dBm @ MCS14 40 MHz
-67 dBm @ MCS15 40 MHz
-
Receiver Sensitivity for 802.11n (5 GHz)
-88 dBm @ MCS0 20 MHz
-85 dBm @ MCS1 20 MHz
-82 dBm @ MCS2 20 MHz
-79 dBm @ MCS3 20 MHz
-76 dBm @ MCS4 20 MHz
-71 dBm @ MCS5 20 MHz
-70 dBm @ MCS6 20 MHz
-69 dBm @ MCS7 20 MHz
-95 dBm @ MCS8 20 MHz
-91 dBm @ MCS9 20 MHz
-87 dBm @ MCS10 20 MHz
-80 dBm @ MCS11 20 MHz
-78 dBm @ MCS12 20 MHz
-74 dBm @ MCS13 20 MHz
-72 dBm @ MCS14 20 MHz
-71 dBm @ MCS15 20 MHz
-84 dBm @ MCS0 40 MHz
-81 dBm @ MCS1 40 MHz
-77 dBm @ MCS2 40 MHz
-75 dBm @ MCS3 40 MHz
-71 dBm @ MCS4 40 MHz
-67 dBm @ MCS5 40 MHz
-64 dBm @ MCS6 40 MHz
-63 dBm @ MCS7 40 MHz
-90 dBm @ MCS8 40 MHz
-85 dBm @ MCS9 40 MHz
-82 dBm @ MCS10 40 MHz
-81 dBm @ MCS11 40 MHz
-77 dBm @ MCS12 40 MHz
-73 dBm @ MCS13 40 MHz
-71 dBm @ MCS14 40 MHz
-68 dBm @ MCS15 40 MHz
-
WLAN Operation Mode
Access point, Client, Client-Router, Sniffer
-
Antenna Connectors
-
PoE Ports (10/100/1000BaseT(X), M12 A-coded 8-pin female connector)
-
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3af for PoE
IEEE 802.1Q for VLAN Tagging
-
10/100/1000BaseT(X) Ports (M12 A-coded 8-pin female connector)
1, M12 A-coded 8-pin female connector, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, auto MDI/MDI-X connection
-
Management
General: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, DHCP
AP-only: ARP, BOOTP, DHCP
-
Security
-
Filter
MAC/IP Protocol/Port-based
-
LED Indicators
PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, Client, WLAN, LAN
-
Digital Inputs
2
+13 to +30 V for state 1
+3 to -30 V for state 0
Max. input current: 8 mA
-
Alarm Contact Channels
Relay output with current carrying capacity of 1 A @ 24 VDC
-
Buttons
-
Housing
-
IP Rating
-
Dimensions
52.9 x 151.9 x 127.4 mm (2.08 x 5.98 x 5.02 in)
-
Weight
-
Installation
DIN-rail mounting, Wall mounting (with optional kit)
-
Input Current
0.67 A @ 12 VDC, 0.17 A @ 48 VDC
-
Input Voltage
12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet
-
Power Connector
1 removable 10-contact terminal block(s)
-
Power Consumption
-
Reverse Polarity Protection
-
Operating Temperature
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
-
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
5 to 95% (non-condensing)
-
EMC
-
EMI
CISPR 32, FCC Part 15B Class B
-
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
-
Railway
-
Railway Fire Protection
-
Radio
EN 300 328, EN 301 893, MIC, FCC ID SLE-WAPN008, IDA
-
Safety
UL 60950-1, IEC 60950-1, EN 60950-1 (LVD)
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Designed specifically for rail carriage-to-carriage communication
- IEEE 802.11a/b/g/n compliant
- Up to 300 Mbps data rate
- M12 anti-vibration connectors
- MIMO technology increases data throughput and range
- Complies with all EN 50155 mandatory test items This product is suitable for rolling stock railway applications, as defined by the EN 50155 standard. For a more detailed statement, click here: www.moxa.com/doc/specs/EN_50155_Compliance.pdf
- Wide-temperature models available for -40 to 75°C environments
- Supports the Auto Carriage-to-Carriage connection function
|
|
|
|
|
|
|