 |
 |
 |
|
The HDR-60-24 Power Supply Series has been specifically designed for industrial applications. The small form factor makes it ideal for installation in limited spaces, and the devices have been built to operate between -30 to 70°C. The devices support AC input ranges from 85 to 264 VAC and conform to the EN 61000-3-2 standard, which the European Union uses to regulate harmonic current. Furthermore, the devices are equipped with constant current mode for overload protection.
-
Wattage
-
Voltage
-
Current Rating
-
Ripple and Noise
-
Voltage Adjustment Range
-
Setup/Rise Time at Full Load
500 ms, 50 ms at 230 VAC
500 ms, 50 ms at 115 VAC
-
Typical Hold Up Time at Full Load
30 ms at 230 VAC
12 ms at 115 VAC
-
Voltage Range
85 to 264 VAC (47 to 63 Hz)
120 to 370 VDC
-
Typical Efficiency
-
Typical Current
0.8 A @ 230 VAC, 1.2 A @ 115 VAC
-
Inrush Current (cold start)
60 A @ 230 VAC, 30 A @ 115 VAC
-
Rated Output Power
-
Protection Type
Constant current limiting, recovers automatically after fault condition is removed
-
Over-Voltage Range
-
Protection Type
Shut down operating voltage, repower on to recover
-
Safety
UL 508, EN 62368-1, UL 62368-1, IEC 62368-1
-
EMC
EN 55032/24, EN 61000-3-2 Class A, EN 61000-3-3
-
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 6000 MHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
-
Dimensions
52.5 x 90 x 54.5 mm (2.07 x 3.54 x 2.15 in)
-
Weight
-
Operating Temperature
-30 to 70°C (-22 to 158°F)
-
Storage Temperature
-40 to 85°C (-40 to 167°F)
-
Max. Operating Temperature at Full Load
-
Ambient Relative Humidity
20 to 90% (non-condensing)
|
|
|
 |
|
 |
|