 |
 |
 |
|
Digi IX20 is a full-featured cellular router that scales from general connectivity applications to industrial routing and security. Its flexible power and connectivity options make it a versatile choice for use in industrial infrastructure, digital signage, retail kiosks, service terminals and other critical assets with a need for secure transactions.
The high-performance architecture of the Digi IX20 router provides automatic and software-selectable primary and backup WWAN connectivity over multi-carrier cellular LTE. Digi IX20 supports advanced security (stateful firewall, MAC filtering and VPN), cellular redundancy (Digi SureLink®) and management (SNMP, event logging, analyzer trace and QOS), facilitating use in PCI or NERC-CIP compliant applications. FirstNet Ready™ models are designed to meet the demands of primary responders for critical communications.
Gain critical insights into your deployed devices and manage your network with Digi Remote Manager® (Digi RM) — the command center for your deployment. Digi RM is a cloud-based solution that facilitates easy setup, mass configuration, maintenance and support, even thousands of devices. Digi RM also provides secure, out-of-band management access to Digi IX20 through a serial port and command-line interface.
The Digi IX20 family of routers has a single part number, which simplifies inventory control for global distribution and deployment. In addition, Digi IX20 is designed for Digi CORE® plug-in LTE modems that can be changed out or upgraded without replacing the entire router.
Digi CORE plug-in LTE modem with dual SIM support
Digi CORE plug-in modems offer dual SIM cellular connectivity and a locking mechanism for added protection. As new LTE technologies become available Digi will launch additional versions of Digi CORE plug-in modems, which may be available for use in Digi IX20, Digi EX15, Digi 6350-SR, Digi 6330-MX, Digi 6310-DX, Digi Connect® IT 4, Digi AnywhereUSB® Plus and future products. The modular nature of Digi CORE plug-in modems helps mitigate technological obsolescence by allowing customers to upgrade to newer LTE standards without replacing their Digi router.
|
SPECIFICATIONS
|
Digi IX20
|
|
CELLULAR*
|
|
CERTIFICATIONS
|
Visit https://www.digi.com/resources/certifications for latest certifications
|
|
LTE (G4) WITH DIGI CORE® PLUG-IN LTE MODEM 1002-CMG4
|
LTE Cat 4: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B38, B39, B40, B41;
3G: B1, B2, B4, B5, B6, B8, B19;
2G: 850 / 900 / 1800 / 1900 MHz
|
|
LTE (N4) WITH DIGI CORE® PLUG-IN LTE MODEM 1002-CMF4
|
LTE Cat 4: B2, B4, B5, B12, B13, B14, B66, B71;
3G: B2, B4, B5;
2G: No support
|
|
LTE (M1) WITH DIGI CORE® PLUG-IN LTE MODEM 1002-CMM1**
|
LTE Cat M1/NB1: B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20,B26, B28;
3G: No support;
2G: 850 / 900 / 1800 / 1900 MHz
|
|
CONNECTORS
|
(2) 50 Ω SMA (center pin: female)
|
|
SIM SLOTS
|
(2) Mini-SIM (2FF)
|
|
SIM SECURITY
|
Secured in cellular module
|
|
WI-FI
|
|
MODULE
|
1 x 1 SISO dual-band 802.11a/b/g/n/ac (2.4 GHz / 5 GHz)
|
|
AUTHENTICATION
|
TACACS+, Enterprise RADIUS
|
|
MODES
|
Client mode and access point mode simultaneously
|
|
CLIENTS
|
Maximum 10 clients (access point mode: regardless of combination of clients and access points)
|
|
ACCESS POINTS
|
Maximum 2 access points (access point mode: regardless of combination of clients and access points)
|
|
SECURITY
|
WPA/WPA-2 personal, WPA/WPA-2 enterprise
|
|
CONNECTORS
|
(1) 50 Ω SMA (center pin: male)
|
|
SOFTWARE AND MANAGEMENT
|
|
REMOTE MANAGEMENT
|
Digi Remote Manager®; SNMP v2/v3 (user installed/managed)
|
|
LOCAL MANAGEMENT
|
WebUI (HTTP/HTTPS); CLI (Telnet, SSH)
|
|
MANAGEMENT / TROUBLESHOOTING TOOLS
|
FTP client, SCP; protocol analyzer with PCAP for Wireshark; event logging with syslog and SMTP client; NTP/SNTP; Nagios, Intelliflow, IPerf, dynamic DNS, ping, traceroute
|
|
MEMORY
|
256 MB RAM, 256 MB flash
|
|
ETHERNET
|
|
PORTS
|
(2) RJ-45; 10/100 Mbps (auto-sensing)
|
|
SERIAL
|
|
PORTS
|
(1) DB9M; RS-232 DTE; signal support TXD, RXD, CTS, DTR, DCD, flow control software (XON/OFF), hardware supported (CTS/RTS)
|
|
PHYSICAL
|
|
DIMENSIONS (L x W x H)
|
107 mm x 162 mm x 35 mm (4.21 in x 6.38 in x 1.38 in)
|
|
WEIGHT
|
0.65 kg (1.4 lb)
|
|
STATUS LEDs
|
Power, Internet, Wi-Fi, SIM 1, SIM 2, signal strength (5), LTE
|
|
ENCLOSURE
|
Glass-filled polyphenylene sulphide (PPS) / IP30
|
|
POWER REQUIREMENTS
|
|
POWER INPUT
|
9 - 30 VDC, 1.0 A maximum; Connector: 2-position rewireable plug with securing screws included
|
|
POWER CONSUMPTION
|
2.5 W typical (idle); 6 W typical (peak Tx/Rx)
|
|
ENVIRONMENTAL
|
|
OPERATING TEMPERATURE
|
Models with Wi-Fi: -20° C to 70° C (-4° F to 158° F); device performance may be impacted above 50° C (122° F)
Models without Wi-Fi: -40° C to 70° C (-40° F to 158° F); device performance may be impacted above 50° C (122° F)
|
|
STORAGE TEMPERATURE
|
-40° C to 85° C (-40° F to 185° F)
|
|
RELATIVE HUMIDITY
|
5% to 95% (non-condensing)
|
|
APPROVALS
|
|
CELLULAR
|
Visit https://www.digi.com/resources/certifications for latest cellular certifications
|
|
SAFETY
|
IEC62368-1, CB, EN62311
|
|
ENVIRONMENTAL
|
ROHS3
|
|
EMISSIONS / IMMUNITY
|
CE; RED; FCC Part 15, Subpart B; ICES-003; AU/NZS CISPR32
|
|
WARRANTY
|
|
PRODUCT WARRANTY
|
3-year***
|
*Transfer rates are network operator dependent.
**Digi CORE 1002-CMM1 requires only one cellular antenna.
***Standard 3-year warranty upgradeable to 5 years with purchase of a Digi Remote Manager Premier 5-year subscription applicable to the product purchased only at the time of product purchase and with product registration at that time in Digi Remote Manager.
|
ENTERPRISE SOFTWARE
|
Description
|
|
PROTOCOL SUPPORT
|
HTTPS, FTP client, SSL, TLS v1.2, SCP (client and server), SFTP, SMTP client for use by scripts and the command line, SNMP (v2/v3), SSH; remote management via Digi Remote Manager®; protocol analyzer, ability to capture PCAP for use with Wireshark; DynDNS; dynamic DNS client compatible with BIND9/No-IP/DynDNS; captive portal, Intelliflow; Nagios, DNS server, NTP server, multicast, mDNS, IPerf
|
|
SECURITY
|
IP filtering, stateful firewall, custom firewall rules (iptables), address and port translation, TLS 1.2 and above, FIPS 197, OpenVPN client and server, VPN tunnels; Authentication: RADIUS, TACACS+; certificates; MAC address filtering; VLAN support
|
|
VPN
|
IPSec with IKEv1, IKEv2, NAT Traversal; OpenVPN client and server; GRE VPN tunnels; Cryptology: SHA-1/256/384/512, MD5, RSA; Encryption: 3DES and AES up to 256-bit (CBC mode for IPsec); Diffie Hellman: DH groups 1-32 (CURVE448)
|
|
ROUTING/FAILOVER
|
IP pass-through; NAT, NAPT with IP port forwarding; Ethernet bridging; GRE; multicast routing; Routing protocols: RIP (v1, v2) OSPF, BGP; IP failover: VRRP; automatic failover, Digi SureLink®
|
|
OTHER PROTOCOLS
|
DHCP; dynamic DNS client compatible with No-IP/DynDNS
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Compact and economical cellular routing platform with industrial feature set
- Redundant connectivity with dual SIMs and Digi SureLink®
- Global bands and single part number to simplify global distribution, deployment and management
- Built-in Digi TrustFence® for device security, secure encrypted connections, ongoing monitoring and support
- Digi Remote Manager® platform for easy setup, mass configuration and management
- Dual Ethernet ports and single serial (RS-232) port
|
|
|
|
|
|
|