 |
 |
 |
|
Introduction
The MGate 5217I Series comprise 2-port BACnet gateways that can convert Modbus RTU/ACSII/TCP to BACnet/IP protocol. Depending on the size and the scale of the network, the gateways provide 600-point and 1200-point models. All models are rugged, DIN-rail mountable, operate in wide temperatures, and offer built-in 2kV isolation for serial signals.
Easy Configuration Via Web Console and Excel Spreadsheet
The MGate 5217I Series comes with an intuitive UI design to make configuration easy. With that, you can easily access protocol conversion modes and finish the configuration in a few steps instead of installing an additional engineering utility in your computer. Besides, the MGate can generate Modbus commands by importing an Excel spreadsheet, which makes it easy to edit Modbus commands.
Modbus and BACnet/IP Protocol Traffic Monitor and Diagnostics
The MGate 5217I gateways support Modbus and BACnet/IP Protocol Traffic Monitor and Diagnostics for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as the wrong slave ID and register address, or an incorrect command configuration. With Diagnostics, you can check the communication status and view values at a glance. With Modbus/BACnet Protocol Traffic Monitor, you can check the captured data and easily identify the root cause.
Security Features Based on IEC 62443
Using network devices that are IEC 62443-4-2 compliant and equipped with basic security capabilities is an effective precautionary measure to ward off cyberattacks. The MGate 5217I Series is capable of several basic security capabilities, including password cracking defense, sniffer and data breach prevention, whitelisting, and the account management.
-
10/100BaseT(X) Ports (RJ45 connector)
2
Auto MDI/MDI-X connection
-
Magnetic Isolation Protection
-
Industrial Protocols
Modbus TCP Client (Master), BACnet/IP Server (Slave)
-
Configuration Options
Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console
-
Management
ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, UDP, NTP Client
-
MIB
-
Time Management
-
No. of Ports
-
Connector
-
Serial Standards
-
Baudrate
-
Data Bits
-
Parity
None, Even, Odd, Space, Mark
-
Stop Bits
-
Flow Control
RTS Toggle (RS-232 only), RTS/CTS, DTR/DSR
-
RS-485 Data Direction Control
ADDCŪ (automatic data direction control)
-
Pull High/Low Resistor for RS-485
1 kilo-ohm, 150 kilo-ohms
-
Terminator for RS-485
-
Isolation
-
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
-
RS-422
-
RS-485-2w
-
RS-485-4w
-
Mode
-
Functions Supported
-
Max. No. of Commands
MGate 5217I-600-T: 600 (up to 300 commands/per serial port)
MGate 5217I-1200-T: 1200 (up to 600 commands/per serial port)
-
Mode
-
Functions Supported
-
Max. No. of Server Connections
-
Max. No. of Commands
MGate 5217I-600-T: 600
MGate 5217I-1200-T: 1200
-
Mode
-
Memory Size
MGate 5217I-600-T: 600 points
MGate 5217I-1200-T: 1200 points
-
Supported BACnet Object
Binary Input
Binary Output
Binary Value
Analog Input
Analog Output
Analog Value
Multi-state Input
Multi-state Output
Multi-state Value
Integer Value
Positive Integer Value
-
Input Voltage
-
Input Current
300 mA @ 24 VAC
510 mA @ 12 VDC
-
Power Connector
Screw-fastened Euroblock terminal
-
Contact Current Rating
Resistive load: 1 A @ 30 VDC
-
Housing
-
IP Rating
-
Dimensions (without ears)
29 x 89.2 x 118.5 mm (1.14 x 3.51 x 4.67 in)
-
Dimensions (with ears)
29 x 89.2 x 124.5 mm (1.14 x 3.51 x 4.90 in)
-
Weight
-
Operating Temperature
-40 to 75°C (-40 to 167°F)
-
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
5 to 95% (non-condensing)
-
EMC
-
EMI
CISPR 32, FCC Part 15B Class A
-
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
-
Safety
-
Freefall
-
Shock
-
Vibration
IEC 60068-2-6, IEC 60068-2-64
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Supports Modbus RTU/ASCII/TCP master/client
- Supports BACnet/IP slave/server
- Supports 600 points and 1200 points models
- Supports COV for fast data communication
- Supports virtual nodes designed to make each Modbus device as a separate BACnet/IP device
- Configures Modbus commands quickly by editing an Excel spreadsheet
- Embedded traffic and diagnostic information for easy troubleshooting
- Built-in Ethernet cascading for easy wiring
- Industrial design with -40 to 75°C operating temperature range
- Serial port with 2 kV isolation protection
- Dual AC/DC power supply
- 5-year warranty
- Security features based on IEC 62443
|
|
|
|
|
|
|