 |
The MGate 5105-MB-EIP is an industrial Ethernet gateway for Modbus
RTU/ASCII/TCP and EtherNet/IP network communication. To integrate existing
Modbus devices onto an EtherNet/IP network, use the MGate 5105-MB-EIP as a
Modbus master or slave to collect data and exchange data with EtherNet/IP
devices. The latest exchange data will be stored in the gateway as well. The
gateway converts stored Modbus data into EtherNet/IP packets so the EtherNet/IP
scanner can control or monitor Modbus devices.
| • Ethernet Interface |
| Protocol |
EtherNet/IP, Modbus
TCP |
| Number
of Ports |
2 (Ethernet
cascade) |
| Speed |
10/100 Mbps, Auto
MDI/MDIX |
| Connector |
8-pin RJ45 |
| Magnetic
Isolation Protection |
1.5 kV
(built-in) |
| • EtherNet/IP |
| Class |
Adapter,
Scanner |
| CIP
Objects Supported |
Identity, Message
Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link,
Port |
| Max.
Number of Connections |
MGate as Adapter: 16
connections for read-only, 1 connection for read/write
MGate as Scanner: 100
connections |
| Max.
Total I/O Data Size |
Input: 2048 bytes (496
bytes per connection)
Output: 2048 bytes (496 bytes per connection) |
| • Modbus |
| Functions
Supported |
1, 2, 3, 4, 5, 6, 15,
16, 23 |
| Max.
Number of Commands |
100 |
| Max.
Number of Connections |
MGate as Modbus TCP
Master: 32 connections
MGate as Modbus TCP Slave: 16 connections |
| Max.
Total I/O Data Size |
Input: 2048
bytes
Output: 2048 bytes |
| • Modbus Serial
Interface |
| Number
of Ports |
1 |
| Serial
Standards |
RS-232/422/485,
software selectable |
| Connectors |
DB9 male |
| Isolation |
2 kV
(built-in) |
| RS-485
Data Direction Control |
ADDC® (automatic data
direction control) |
| Pull
High/Low Resistor for RS-485 |
1 KΩ, 150 KΩ |
| Terminator
for RS-485 |
120 Ω |
| Data
Bits |
5, 6, 7, 8 |
| Stop
Bits |
1, 1.5, 2 |
| Parity |
None, Even, Odd,
Space, Mark |
| Flow
Control |
RTS/CTS |
| Baudrate |
50 bps to 921.6
Kbps |
| • External Storage
Drive |
| Interface |
microSD |
| Standard |
SDHC v2.0 |
| • Serial Signals |
| RS-232 |
TxD, RxD, RTS, CTS,
DTR, DSR, DCD, GND |
| RS-422 |
Tx+, Tx-, Rx+, Rx-,
GND |
| RS-485-4w |
Tx+, Tx-, Rx+, Rx-,
GND |
| RS-485-2w |
Data+, Data-,
GND |
| • Software |
| Operation
Modes |
EtherNet/IP
Adaptor/Scanner, Modbus RTU/ASCII/TCP Master/Slave |
| Configuration
Options |
Serial console,
Windows utility |
| Utilities |
MGate Manager for
Windows 2000/XP/2003/Vista/Server 2008/7/8 (x86/x64), Windows Server 2008
R2/2012 (x64) |
| Bonus
Features |
QuickLink |
| • Physical
Characteristics |
| Housing |
Metal (IP30) |
| Weight |
507 g |
| Dimensions |
36 x 105 x 140 mm
(1.42 x 4.13 x 5.51 in) |
| • Environmental
Limits |
| Operating
Temperature |
Standard Models: 0 to
60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage
Temperature |
-40 to 85°C (-40 to
185°F) |
| Ambient
Relative Humidity |
5 to 95%
(non-condensing) |
| Altitude |
Up to 2000 m |
| Note |
Please contact Moxa if
you require products guaranteed to function properly at higher
altitudes. |
| • Power Requirements |
| Input
Voltage |
12 to 48 VDC |
| Power
Connector |
Terminal
block |
| Power
Consumption |
455 mA @ 12 VDC, 125
mA @ 48 VDC |
| • Standards and
Certifications |
| Safety |
UL 508, EN
60950-1 |
| EMC |
CE, FCC |
| EMI |
EN 55022 Class A, FCC
Part 15 Subpart B Class A |
| EMS |
EN 55024,
EN
61000-4-2 (ESD) Level 4,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT)
Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN
61000-4-8,(PFMF) Level 3 |
| Shock |
IEC
60068-2-27 |
| Freefall |
IEC
60068-2-32 |
| Vibration |
IEC
60068-2-6 |
| • Reliability |
| MTBF
(mean time between failures) |
513,139 hrs |
| • Warranty |
| Warranty
Period |
5 years |
Details |
See
www.moxa.com/warranty |
Configuration Backup via microSD CardThe MGate 5105-MB-EIP is equipped with a microSD card slot. A microSD card
can be used to back up both the system configuration and system log, and can be
used to conveniently copy the same configuration to several MGate 5105-MP-EIP
units. The configuration ile stored in the microSD card will be copied to the
MGate itself when the system is rebooted.
Effortless Configuration and Troubleshooting via Web ConsoleThe MGate 5105-MB-EIP also provides a web console to make configuration easy
without having to install an extra utility. Simply log in as an administrator to
access all settings, or as a general user with read-only permission. Besides
configuring basic protocol settings, you can use the web console to monitor I/O
data values and transfers. In particular, I/O Data Mapping shows data addresses
for both protocols in the gateway’s memory and I/O Data View allows you to track
data values for online nodes. Moreover, diagnostics and communication analysis
for each protocol can also provide helpful information for troubleshooting.
|
|
|