 |
 |
 |
|
The PT-G7728/G7828 modular switches provide up to 28 gigabit ports, including 4 fixed ports, 6 interface module slots, and 2 power module slots to ensure sufficient flexibility for a variety of applications. The PT-G7728/G7828 switches are designed to meet evolving network requirements, including a hot-swappable module design that enables you to change or add devices without shutting down your device. IEC 61850-3 28-port full gigabit modular managed Ethernet switches. The multiple Ethernet modules (RJ45, SFP, PoE) and power units (24/48 VDC, 110/220 VAC/VDC) available provide even greater flexibility as well as suitability for different operating conditions. The switches support a full gigabit platform that provides enough bandwidth to set up an Ethernet backbone. Certifications include IEC 61850 Edition 2 Class 2 to ensure high availability and wide usage.
|
• Technology
|
|
Standards
|
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
|
|
• Software Features
|
|
Management
|
IPv6, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SNMP Inform, LLDP, Flow Control, Back Pressure Flow Control, Port Mirror, Fiber Check, Syslog, Dying Gasp
|
|
• *IPv6 applies only to the PT-G7728 model.
|
|
Filter
|
IGMPv1/v2/v3, GMRP, GVRP, 802.1Q
|
|
Redundancy Protocols
|
STP/RSTP, MSTP, Turbo Ring v1/v2, Turbo Chain, Link Aggregation
|
|
Security
|
RADIUS, TACACS+, SSL, SSH, Port Lock, Broadcast Storm Protection, MAC Authentication Bypass, MAC Sticky, Access Control Lists
|
|
Time Management
|
SNTP, NTP Server/Client, IEEE 1588v2 PTP (hardware-based)
|
|
Industrial Protocols
|
EtherNet/IP, Modbus/TCP
|
|
MIB
|
MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
|
|
Power Substation
|
MMS, IEC 61850 QoS
|
|
• Switch Properties
|
|
Priority Queues
|
8
|
|
Max. Number of VLANs
|
512
|
|
VLAN ID Range
|
VID 1 to 4094
|
|
IGMP Groups
|
4096
|
|
MAC Table Size
|
16K
|
|
Packet Buffer Size
|
12 Mbits
|
|
Jumbo Frame Size
|
9.6 KB
|
|
• Interface
|
|
Port Types
|
Supports up to 28 ports:• 4 fixed ports:
2 10/100/1000BaseT(X) ports and 2 100/1000BaseSFP ports
• 6 modular slots for 4-port interface modules that support 10/100/1000BaseT(X), PoE+ 10/100/1000BaseT(X), or 100/1000BaseSFP
|
|
Note
|
See the LM-7000H datasheet for Gigabit Ethernet module and PoE+ module information.
|
|
Console Port
|
Micro-B USB
|
|
Storage Port
|
USB storage port (Type A connector)
|
|
• Power Requirements
|
|
Note
|
The power requirements depend on which power module is being used. Detailed information can be found in the PWR-HV/LV-P48 datasheet.
|
|
Input Voltage
|
• with PWR-LV-P48 installed:
24/48 VDC for the switch system
48 VDC for PoE system
(53 to 57 VDC is recommended for PoE+ devices)
• with PWR-HV-P48 installed:
110/220 VDC/VAC
48 VDC for PoE system
(53 to 57 VDC is recommended for PoE+ devices)
|
|
Operating Voltage
|
• with PWR-LV-P48 installed:
18 to 72 VDC for the switch system
46 to 57 VDC for PoE systems
• with PWR-HV-P48 installed:
88 to 300 VDC, 90 to 264 VAC
46 to 57 VDC for PoE systems
|
|
Input Current
|
• with PWR-LV-P48 installed:
PWR input current (switch system)
Max. 0.49 A @ 24 VDC
Max. 0.25A @ 48 VDC
EPS input current (PoE System)
Max. 0.53 A @ 48 VDC
(excluding power consumption of PoE devices)
• with PWR-HV-P48 installed
PWR input current (switch system)
Max. 0.12 A @ 110 VDC
Max. 0.07 A @ 220 VDC
Max. 0.29 A @ 110 VAC
Max. 0.18 A @ 220 VAC
EPS input current (PoE System)
Max. 0.53 A @ 48 VDC
(excluding power consumption of PoE devices)
|
|
• Physical Characteristics
|
|
IP Rating
|
IP30
|
|
Dimensions
|
443 x 44 x 280 mm (17.44 x 1.73 x 11.02 in)
|
|
Weight
|
3.08 kg (6.8 lb)
|
|
Installation
|
19-inch rack mounting
|
|
• Environmental Limits
|
|
Operating Temperature
|
-40 to 85°C (-40 to 185°F)
|
|
Storage Temperature
|
-40 to 85°C (-40 to 185°F)
|
|
Ambient Relative Humidity
|
5 to 95% (non-condensing)
|
|
• Standards and Certifications
|
|
Safety
|
UL 61010-2-201, EN 61010 (LVD) (Pending)
|
|
EMC
|
EN 55032, EN 55024
|
|
EMI
|
CISPR 22, FCC Part 15B Class A
|
|
EMS
|
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
|
|
Electrical Substations
|
IEC 61850-3 ed2 Class 2, IEEE 1613
|
|
Rail Traffic
|
EN 50121-4
|
|
• MTBF (mean time between failures)
|
|
Time
|
449,542 hrs
|
|
Standard
|
Telcordia (Bellcore), GB
|
|
• Warranty
|
|
Warranty Period
|
5 years
|
|
Details
|
See www.moxa.com/warranty
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Features and Benefits
- IEC 61850-3 Edition 2 Class 2 compliant
- Hot-swappable interface modules and power modules
- Built-in MMS server based on IEC 61850-90-4 switch data modeling for Power SCADA
- IEEE 1588 hardware time stamp supported
- V-ON™ ensures millisecond-level multicast data and video network recovery
|
|
|
|
|
|
|