|
Video
|
|
Video Compression
|
H.264 (MPEG4 part 10), MJPEG
|
|
Video Inputs
|
1 (BNC connector)
|
|
Video Outputs
|
over Ethernet
|
|
Video Streams
|
3, H.264 or MJPEG video streams
|
|
NTSC/PAL
|
Auto-sensing or manual
|
|
Video Resolution and FPS (frames per second)
|
|
|
Video Viewing
|
• DynaStream™ supported for changing the video frame rate automatically
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 10 simultaneous unicast connections, 50 multicast clients
• CBR Pro™ supported for accurate streaming bit rate control
• Image manipulation: 180° rotation
• Image tuning: control brightness, contrast, saturation
|
|
• Audio
|
|
Audio Inputs
|
1 Line-in or MIC-in with 3.5 mm phone jack
|
|
Audio Outputs
|
1 Line-out with 3.5 mm phone jack
|
|
Audio Format
|
Mono, PCM (G.711)
|
|
• Network
|
|
Protocols
|
IPv4/v6, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS (ToS), SNMP V3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS
|
|
Ethernet
|
2 10/100BaseT(X) Ethernet ports, RJ45 connector
|
|
• Serial Port
|
|
PTZ Ports
|
1 RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps
|
|
COM Ports
|
1 RS-232 or 485 port, DB9 male connector, 115.2 kbps
|
|
Console Port
|
1 RS-232 port, RJ45 connector
|
|
• Local Storage
|
|
SD Socket
|
Standard SD socket, V2.0 (SDHC)
|
|
• GPIO
|
|
Digital Inputs
|
2, max. 8 mAHigh: +13 to +30 V; Low: -30 to +3 V
|
|
Relay Outputs
|
2, max. 24 VDC @ 1 A
|
|
• LED Indicators
|
|
STAT
|
Indicates if system is booted up properly or not
|
|
PWR1
|
Power 1
|
|
PWR2
|
Power 2
|
|
FAULT
|
Can be configured to correspond to system alarm, power failure, or disconnected network
|
|
VIDEO
|
Video input signal
|
|
PTZ
|
Indicates if PTZ or COM port data has been transmitted
|
|
SD
|
Indicates if SD card was mounted successfully
|
|
• Power Requirements
|
|
Input Voltage
|
12 to 32 VDC, or 18 to 30 VAC
|
|
Input Current
|
12 to 32 VDC, 0.85 to 0.30 A; 18 to 30 VAC, 0.85 to 0.56 A
|
|
• Physical Characteristics
|
|
Housing
|
Metal, IP30 protection
|
|
Dimensions
|
46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in)
|
|
Weight
|
710 g (including DIN-rail mounting kit)
|
|
Installation
|
DIN-Rail mounting, wall mounting (with optional kit)
|
|
• Alarms
|
|
Intelligent Video
|
Camera tampering
|
|
Video Motion Detection
|
Includes sensitivity tuning
|
|
Scheduling
|
Daily repeat timing schedule
|
|
Imaging
|
JPEG snapshots for pre/trigger/post alarm images
|
|
Custom Alarms
|
HTTP event servers and CGI events for setting customized alarm actions
|
|
Email/FTP Messaging
|
Automatic transfer of stored images via email or FTP with event-triggered actions
|
|
Pre-alarm Buffer
|
50 MB for JPEG snapshot images
|
|
• PAN/TILT/ZOOM
|
|
PTZ Camera Control
|
Via PTZ port or COM port
|
|
PTZ Control Functions
|
PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 128 positions)
|
|
PTZ Function Updates
|
Driver upload supported
|
|
Supported Device Protocols
|
Pelco D, Pelco P, Custom Camera
|
|
• Security
|
|
Password
|
User level password protection
|
|
Filtering
|
By IP address
|
|
Authentication
|
802.1X
|
|
Encryption
|
HTTPS, SSH
|
|
• Environmental Limits
|
|
Operating Temperature
|
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
|
|
Storage Temperature
|
-40 to 85°C (-40 to 185°F)
|
|
Ambient Relative Humidity
|
5 to 95% (non-condensing)
|
|
Vibration
|
IEC 60068-2-6, 2 to 17.8 Hz: ±1.6 mm; 17.8 to 500 Hz: 2g; 2 hrs/axis
|
|
Shock
|
IEC 60068-2-27, 20g/11ms
|
|
Altitude
|
2000 m
|
|
Ingress Protection
|
IEC 60529, IP30
|
|
• Standards and Certifications
|
|
Safety
|
UL 60950-1
|
|
EMC
|
EN 55022/24
|
|
EMI
|
CISPR 22, FCC Part 15B Class A
|
|
EMS
|
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
IEC 61000-4-11
|
|
Transportation
|
NEMA TS2*
|
|
*Note
|
Please check Moxa’s website for the most up-to-date certification status.
|
|
• MTBF (mean time between failures)
|
|
Time
|
647,088 hrs
|
|
Standard
|
Telcordia SR332
|
|
• Warranty
|
|
Warranty Period
|
5 years
|
|
Details
|
See www.moxa.com/warranty
|
|
• Minimum Viewing System Requirements
|
|
CPU
|
Pentium 4, 2.4 GHz or above
|
|
Memory
|
512 MB memory or above
|
|
OS
|
Windows XP/2000 with SP4 or above, Windows Vista, Windows 7
|
|
Browser
|
Internet Explorer 9.x or above
|
|
Multimedia
|
DirectX 9.0c or above
|
|
• Software Development Kit
|
|
VPort SDK PLUS
|
Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is available for download from Moxa’s website).
|
|
Standard
|
ONVIF, Profile S
|
