Digi XB24CDMPIS-001 - IndustrialDirect.com

Home > Digi > Digi Embedded Systems > Digi XBee RF Modules > Digi XBee and XBee3 DigiMesh >

XB24CDMPIS-001

See any errors on this page?
Please let us know.

Digi XBee S2C DigiMesh, 2.4GHz, SMT (PCB Ant) (*MOQ May Apply)

Our Price: $29.33

Contact Us for Partner Pricing. (more info)
(Minimum order): 36

Availability:: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: XB24CDMPIS-001

Description

Technical Specs

Drivers & Downloads

Digi XBee DigiMesh® 2.4 delivers end-point device connectivity with a globally deployable 2.4 GHz transceiver. These modules use the innovative DigiMesh® networking protocol. This innovative, peer-to-peer protocol offers users added network stability through self-healing, dense network operation and with a very low housekeeping overhead, it is capable of extending the operational life of battery dependent networks.

Digi XBee modules are ideal for low-power, low-cost applications. Digi XBee-PRO modules are power-amplified versions of Digi XBee modules for extended-range applications. Part of the Digi XBee family of RF products, these modules are easy-to-use, share a common hardware footprint, and are fully interoperable with other XBee products utilizing the same technology. Module users have the ability to substitute one Digi XBee for another with minimal development time and risk.

The updated Digi XBee S2C DigiMesh® 2.4 module is built with the SiliconLabs EM357 SoC and offers improved power consumption, support for over-the-air firmware updates, and provides an upgrade path to IEEE 802.15.4 or ZigBee® mesh protocols if desired.

Documentation

PDF Getting Started Guide

PDF User Guide

Digi XBee S2C DigiMesh® 2.4	Digi XBee-PRO S2C DigiMesh® 2.4
PERFORMANCE
TRANSCEIVER CHIPSET	Silicon Labs EM357 SoC
DATA RATE	RF 250 Kbps, Serial up to 1 Mbps
INDOOR/URBAN RANGE*	Up to 200 ft (60 m)	Up to 300 ft (90 m)
OUTDOOR/RF LINE-OF-SIGHT RANGE*	Up to 4000 ft (1200 m)	Up to 2 miles (3200 m)
TRANSMIT POWER	3.1 mW (+5 dBm) / 6.3 mW (+8 dBm)boost mode	63 mW (+18 dBm)
RECEIVER SENSITIVITY (1% PER)	-100 dBm / -102 dBm boost mode	-101 dBm
FEATURES
SERIAL DATA INTERFACE	UART, SPI
CONFIGURATION METHOD	API or AT commands, local or over-the-air (OTA)
FREQUENCY BAND	ISM 2.4 GHz
FORM FACTOR	Through-Hole, Surface Mount
HARDWARE	S2C
ADC INPUTS	(4) 10-bit ADC inputs
DIGITAL I/O	15
ANTENNA OPTIONS	Through-Hole: PCB Antenna, U.FL Connector, RPSMA Connector, or Integrated Wire SMT: RF Pad, PCB Antenna, or U.FL Connector
OPERATING TEMPERATURE	-40º C to +85º C
DIMENSIONS (L X W X H) AND WEIGHT	Through-Hole: 0.960 x 1.087 in (2.438 x 2.761 cm) SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm)	Through-Hole: 0.960 x 1.297 in (2.438 x 3.294 cm) SMT: 0.866 x 1.33 x 0.120 in (2.199 x 3.4 x 0.305 cm)
NETWORKING AND SECURITY
PROTOCOL	XBee 802.15.4 (Proprietary 802.15.4)
UPDATABLE TO DIGIMESH® PROTOCOL	Yes
UPDATABLE TO ZIGBEE PROTOCOL	Yes
INTERFERENCE IMMUNITY	DSSS (Direct Sequence Spread Spectrum)
ENCRYPTION	128-bit AES
RELIABLE PACKET DELIVERY	Retries/Acknowledgements
FILTRATION OPTIONS	PAN ID, Channel, and 64-bit addresses
CHANNELS	16 channels	15 channels
POWER REQUIREMENTS
SUPPLY VOLTAGE	2.1 to 3.6V	2.7 to 3.6V
TRANSMIT CURRENT	33 mA @ 3.3 VDC / 45 mA boost mode	120 mA @ 3.3 VDC
RECEIVE CURRENT	28 mA @ 3.3 VDC / 31 mA boost mode	31 mA @ 3.3 VDC
POWER-DOWN CURRENT	<1 μA @ 25º C	<1 μA @ 25º C
REGULATORY APPROVALS
FCC, IC (NORTH AMERICA)	Yes	Yes
ETSI (EUROPE)	Yes	No
RCM (AUSTRALIA AND NEW ZEALAND)	No (Coming soon)	No (Coming soon)
TELEC (JAPAN)	No (Coming soon)	No (Coming soon)