|
|
|
|
The Digi XBee-PRO XSC 900 MHz RF module features two times the throughput and 20 times less current draw than the previous XSC module, making it ideal for long-range sensor applications. The RF module features an ADF7023 transceiver from Analog Devices, delivering best-in-class distances up to 28 miles Line-of-Sight (LOS)*, along with low power consumption, drawing less than 2.5 uA in power down.
The latest Digi XBee-PRO XSC (S3B hardware) is firmware compatible with the legacy 9XStream® and the legacy Digi XBee-PRO XSC modules.
Digi’s free X-CTU configuration utility simplifies the configuration of the XSC module, which requires no programming. In addition, it can be easily configured via a simplified AT command set. The RF modules are pre-certified for North America and Australia, further reducing development costs and time to market.
Specifications
|
Digi XBee-PRO XSC (S3B)
|
Hardware
|
Processor
|
ADF7023 transceiver, Cortex-M3 EFM32G230 @ 28 MHz
|
Frequency Band
|
902 MHz to 928 MHz
|
Antenna Options
|
Wire, U.FL, RPSMA
|
Performance
|
RF Data Rate
|
10 Kbps or 20 Kbps
|
Indoor/Urban Range*
|
Up to 2000 ft (610 m)
|
Outdoor/Line-Of-Sight Range*
|
Up to 9 mi (14 km) w/ dipole antenna
Up to 28 mi (45 km) w/ high-gain antenna
|
Transmit Power
|
Up to 24 dBm (250 mW) software selectable
|
Receiver Sensitivity
|
-109 dBm at 9600 baud -107 dBm at 19200 baud
|
Features
|
Spread Spectrum
|
FHSS
|
Operating Temperature
|
-40° C to +85° C
|
Power
|
Supply Voltage
|
2.4 to 3.6 VDC
|
Transmit Current
|
215 mA
|
Receive Current
|
26 mA
|
Sleep Current
|
2.5 uA
|
Regulatory Approvals
|
FCC
|
MCQ-XBPS3B
|
IC
|
1846A-XBPS3B
|
C-Tick
|
Australia
|
ANATEL
|
Brazil
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- For new designs that do not require interoperability with 9XStream radios, see XBee-PRO 900HP
- Over-the-air compatibility with legacy 9XStream products
- 20 times less current draw than previous XSC module
- Superior outdoor LOS range of up to 28 miles*
|
|
|
|
|
|
|